The contactor is controlled by a synchronous welding controller type RKSM, which output unipolar symmetrical pulses with a frequency that is twice the frequency of the network, with the parameters:
current 1.5 ± 0.1 A;
voltage 20 ± 5 V (on the resistance of 6.2 ± 5% Ohm);
duration 200 ± 100 μs (at a level not lower than 15 V).
Pass through the entrance of the Institute of Superhard Materials by car. Please, use the tips on the map below. Our office is on the second floor of the building.
Skip to content 
