About VISP

Implementation of engineering technologies

The company was established on the basis of the All-Union Design and Technology Institute of Welding Production. We have preserved the technical archive of the institute, these are the decades of experience of several generations of developers!

Our story

2000
Developed and implemented a section for the restoration of crankshafts for Ukrzaliznytsia in Ilovaisk
2001
Introduced an automatic line for strengthening fast-wearing parts of tillage plows at OJSC "Odessilmash"
2002
Vibrostabilization technology was introduced at the Tikhoretsk Machine-Building Plant
2003
Established serial production of rotator control units for PJSC "IZMZU"
2004
Manufactured and implemented a spraying plant for railway transport parts in Poltava
2005
Introduced a machine for hardening HFC shafts around up to 4000 mm in length and up to 400 in diameter at JSC "DIISW" in Kamensky
2006
Made a semiautomatic device for the restoration of the axles of the wheel pairs, as well as an inductor and equipment for heating the tail of the HFC coupling body and introduced the process of heating the HFC on ultrasound in Fastiv
2007
The serial production of devices for control of RKSM contact welding machines has been established. Made a column for ESR in Kyiv
2008
Manufactured and supplied equipment for the creation of a section for the restoration of parts of friction units of railway rolling stock by induction-metallurgical surfacing method on Ukrzaliznytsia in Fastiv
2009
A line for restoring springs at Ukrzaliznytsia in Fastiv was introduced
2010
Manufactured and supplied equipment for the creation of a section for the restoration of parts of friction units of railway rolling stock by induction-metallurgical surfacing method on the Ukrzaliznytsia in Fastiv
2011
Manufactured and installed equipment for the restoration of crankshafts at Ukrzaliznytsia in Korosten
2012
Installation of assembly and dismantling of a freight car on Ukrzaliznytsia in Fastiv
2013
Surfacing equipment of a freight car on Ukrzaliznytsia in Fastiv
2014
Line of assembly and disassembly of the absorber on Ukrzaliznytsia in Fastiv
2015
Development of equipment, testing of technology for welding non-rotating joints of large diameter pipes and transfer of documentation for production to the "TEMP" plant in Khmelnitsky
2016
Development of production of the line of cleaning of cartridges of "Self-rescuers" DZGA in Izmir, Turkey
2017
Surfacing equipment for the oversprung beam and side frames of freight carts on Ukrzaliznytsia in Fastiv
2018
A tanker of welded structures on 10 tones for PJSC "Kredomash" in Kremenchuk. Installation for surfacing of rolls in the environment of protective gases for Metinvest (Mariupol)
2019
Surfacing equipment of rolls under a layer of flux and surfacing units of planes in the environment of protective gases for Metinvest (Mariupol)
2020
The surfacing of internal surfaces and crane wheels for Metinvest

Our team

Yurii Nikityuk

CEO

Ihor Onashko

CTO

Mykhailo Lanovenko

Chief software engineer

Mykola Cherkovskii

Сhief designer

Volodymyr Arkhypenko

Production supervisor

Our clients

Contact us

Viber: +38 (050) 310-51-19
Visit our office:
Ukraine, Kyiv, 04074
Avtozavodskaya Street, 2
 
How to find:
Pass through the entrance of the Institute of Superhard Materials by car.
Please, use the tips on the map below. Our office is on the second floor of the building.